Seco-Larm Enforcer IR Reflective Photoelectric Sensor, 50 ft.

Monitor your garage, gate, driveway or doorway with the Seco-Larm Enforcer Photoelectric Beam Sensor (50 ft.). This weatherproof sensor triggers an alarm in a connected security system when its infrared (IR) beam is broken. The 3-inch round reflector can be installed discretely on a wall or other flat surface. It provides a large sensing area for wide entryways, as well as easier alignment during installation. This sensor also features lensed optics and dual-color LEDs to strengthen the beam and minimize false alarms due to rain, snow, falling leaves, birds, etc.

• Up to 50-foot sensing range (sensor to reflector)
• Suitable for indoor or outdoor use
• Weatherproof with sunlight-filtering case
• Near immediate response time from 10ms
• Mounting hardware included

• Sensor
• Reflector
• Mounting Bracket
• Sensor Hood
• (4) Cover Screws
• (2) Mounting Screws
• Reflector Mounting Screw
• Rubber Ring
• Cable Connector
• Manual
• Removable Terminal Block
• 10KΩ Resistor

• Manufacturer Part #: E-931-S50RRGQ
• UPC: 676544017295
• Type: Reflective photoelectric beam sensor
• Sensing Range: Up to 50 feet (15m)
• Operating Voltage: 12~30DC/ADC, 100mA
• Current Draw: Standby:55mA at 12VDC Active:40mA@12VDC
• Response Time: 10ms
• Light Source: IR LED
• LEDs:
• Solid Red: No beam signal, triggered
• Alternating Flash: Poor beam signal
• Solid Green: Good beam signal, properly aligned
• Alarm Output: NO/NC relay, 0.5A at 120VAC, min. 1s
• Tamper Switch: NC switch, 500mA at 30VAC/VDC
• Alignment Angle: Horizontal: ±90 degrees; Vertical: ±15 degrees
• Enclosure: Weatherproof IP55
• Operating Temperature: -13° to 131°F (-25° to 60°C)
• Dimensions: 3-3/16 x 7-3/16 x 3-9/16 inches (81 x 182 x 91 mm)
• Weight:
• Sensor: 11.6 ounces (329g) with hood
• Reflector: 5.9 ounces (167g) with hood
• Approvals: ISO 9001, CE, RoHS
• Warranty: 1 Year